HOME   |   ABOUT COMAP   |   PRODUCTS   |   ASK THE EXPERT   |  IINSTALLATION GUIDE   |  DOWNLOADS   |   CONTACT US
 
 
   Thermostatic Radiator Valves
Westherm 4 Reversible TRV CP
Westherm with Sudofit Bend
Westherm Sudofit TRV CP
Comap 6800 TRV
 
Home > Products > Heating > Thermostatic Radiator Valves   
 
     HEATING PRODUCTS
  • Ideally suited for use in all domestic and commercial central heating installations.
  • Comap 6800, Senso and Westherm TRVs have polished chromed brass bodies and are fully reversible.
  • The Senso and the Comap 6800 have liquid expansion integrated control and probe heads. The Westherm Four has a wax expansion head.
  • The Westherm is available either in Sudofit, or with a 10mm Sudofit Chromed elbow.

  • EN215 approved


  Westherm 4 Reversible TRV CP:

  • The Westherm consists of a decorative head, a chrome plated brass body, and is packaged complete with a protective cap. The cap is used to protect the valve when the head is removed in installation, or when decorating.
  • The fully reversible valve has a wax expansion head.
  • The Westherm can be locked to a pre determined temperature setting, or can be given limitations of a highest and lowest temperature setting, using the retention pins provided.
  • Each valve is sold with full installation instructions.


  • Approved to EN215

  Westherm TRV with Sudofit Bend:

  • The Westherm TRV is now available with 10mm Sudofit bend, making it ideal for new installations or renovations with Pex tube.
  • Where the pipework is installed in the dry lining of a building, and where pipes come through the walls to meet the radiators, the Sudofit bend takes away all the hassle of using additional fittings to make the connection.
  • The bends are finished in chrome to match the valves, to ensure a good looking installation.
  • Sudofit can be used with both Pex and copper tube.

  Westherm Sudofit TRV CP :

  •  The Westherm Thermostatic Radiator Valve is now available with Sudofit technology.
  • The addition of the pushfit fitting in place of the compression nut and olive, means that the valve may simply be pushed onto Pex or copper tube.
  • In addition to the time saving benefits of this valve, the other main advantages are that the valve can be rotated on the tube without disconnecting, and if necessary, can easily be demounted and refitted without replacing any parts.
  • Thermostatic valves with the Sudofit connection are reversible but can only be fitted in a vertical position on either the flow or return.

  • Approved to EN215

  Comap 6800 TRV :

  •  The Comap 6800 consists of a decorative head, a chrome plated brass body, and is packaged complete with a protective cap. The cap is used to protect the valve when the head is removed in installation, or when decorating.
  • The fully reversible valve has a wax expansion head.
  • The 6800 can be locked to a pre-determined temperature setting, or can be given limitations of a highest and lowest temperature setting, using the retention pins provided.
  • Each valve is sold with full installation instructions and is available in 8mm, 10mm and 15mm.

  • Approved to EN215
 
© Comap India. All Rights Reserved. Developed by General Data Pvt. Ltd. For more info, e-mail: info@comapindia.com   |  Contact Us | Disclaimer